Hardware you need
To connect a Pulse based Payment system to your Photo Booth, you will need the following hardware. Breeze does not sell payment hardware. You must purchase from the vendors listed below directly.
- iPac-2 Controller Board
- Power Supply
- Nayax Credit Card Terminal
- Breeze Photo Booth
- Other Pulse Devices
i-Pac2 Controller Board
The I-PAC2 is a USB interface board that connects to a pulse-based payment terminal and, on successful payment, sends a keyboard shortcut to Breeze to trigger actions such as starting a photo booth session.
https://www.ultimarc.com/control-interfaces/i-pacs/i-pac2/
Power Supply
NAYAX systems typically require a 24V 2A power supply, while other pulse-based terminals may have different requirements. The power supply is not plug-and-play and must be wired correctly. A simple option is to use a power supply with a 2.1 mm barrel jack together with a screw terminal adapter. Please consult a qualified professional if you are unsure.
Nayax VPOS
https://www.nayax.com/solution/vpos-touch/
Breeze Photo Booth
The I-Pac2 board connects to either your Photo Booth via USB and sends a keyboard shortcut upon successful payment. It will work with Remote Pro and Breeze Booth for iPad/Mac.
Other Supported Pulse Devices
Our payment systems have been tested with Nayax terminals, but also support a wide range of pulse-based payment devices (including coin acceptors). As pulse is a simple and widely supported method, most compatible hardware should work when set up correctly.